KeepLiNK • 公式ウェブサイト

KeepLiNK 9 ポート 2.5G マネージド PoE スイッチ、10G SFP+ アップリンク ファンレス メタル搭載

Original price was: €226.11.Current price is: €92.92.
KeepLiNK 9 ポート マルチギガビット マネージド PoE スイッチは、ホーム ラボや小規模オフィス向けに構築された静音のファンレス金属エンクロージャで、8 ポートの 2.5Gbps Power over Ethernet と 1 つの 10Gb SFP+ アップリンクを提供します。 VLAN、QoS、LACP のサポートにより、ネットワーク管理者は正確なトラフィック制御を行うことができ、IEEE 802.3az のエネルギー効率により運用コストが低く抑えられます。

KeepLiNK 9 ポート マネージド PoE スイッチの機能と仕様

8 個の 2.5Gbps PoE ポートはそれぞれ最大定格電力を供給し、個別の電源アダプタを使用せずにワイヤレス アクセス ポイント、IP カメラ、および VoIP 電話を接続できます。専用の 1x 10Gb SFP+ アップリンク ポートは、NAS、サーバー、またはコア ルーターへの大容量バックボーン接続を作成し、帯域幅のボトルネックを排除します。ファンレスの金属筐体によりファンのノイズが完全に排除されるため、このスイッチは静かなホームラボ、リビングルームのメディアセットアップ、ノイズに敏感なオフィス環境に最適です。管理機能には 802.1Q VLAN セグメンテーション、QoS プライオリティ キューイング、LACP リンク アグリゲーションが含まれており、コンパクトな 9 ポート プラットフォーム上でエンタープライズ グレードの制御を実現します。 IEEE 802.3az エネルギー効率の高いイーサネットは、アイドル状態のリンクでの消費電力を自動的に削減するため、KeepLiNK のような信頼できるブランドが提供する手動構成を必要とせずに電力消費量を削減します。

KeepLink 9 ポート マルチギガビット マネージド スイッチ、8 ~ 2.5Gbps PoE および 1 ~ 10Gb SFP+ アップリンク付きKeepLink 9 ポート マルチギガビット マネージド スイッチ、8 ~ 2.5Gbps PoE および1-10Gb SFP+ アップリンクKeepLink 9 ポート マルチギガビット8 ~ 2.5 Gbps PoE および 1 ~ 10 Gb SFP+ アップリンクを備えたマネージド スイッチKeepLink 9 ポート マルチギガビット マネージド スイッチ、8 ~ 2.5 Gbps PoE および 1 ~ 10 Gb SFP+ アップリンク付きKeepLink 9 ポート マルチギガビット マネージド スイッチ、8 ~ 2.5Gbps PoE および1-10Gb SFP+ アップリンクKeepLink 9 ポート8 ~ 2.5 Gbps PoE および 1 ~ 10 Gb SFP+ アップリンクを備えたマルチギガビット マネージド スイッチ

KeepLiNK 9 ポート 2.5G マネージド PoE スイッチ、10G SFP+ アップリンク ファンレス メタル搭載 のレビュー 5 件

  1. J***g

    配達ドライバーが私のコンクリートのポーチに荷物を投げ込んだのはこれが2度目です。初めて、デバイスが正常に機能しなかったため、返品する必要がありました。配達ドライバーが荷物を投げつけて機器を破損させたのが原因ではないかと思われます。良いレビューをしたいと思っていますが、レビューの対象となるのはプロセス全体であり、選択した宅配業者の専門的な(欠如)基準により、機能するデバイスが私に与えられず、私の時間と販売者のお金の両方が無駄になります。

  2. A***f

    まさに私が探していたものです。 2.5g (確認済み)、VLAN (確認済み) – 混合 (タグ付き + タグなし) とタグ付きのみ (別名トランク) または単一のタグなし VLAN (アクセス ポート) の両方をサポートします。また、ストーム制御 (構成済みだがテストされていない)、stp/rstp (テスト済み)、igmp スヌーピング (未テスト)、最大 12k のジャンボ フレーム (テスト予定)、lacp などの通常の設定もあります。そしてもちろんポーも。私は電源、管理ネットワーク(タグなし)、および複数の VLAN を ubiquiti unifi u7pro に供給していますが、それは魅力的に機能します。イーサネット ハンドシェイクは 2.5g です。機器が不足しているため、まだフルスピードでテストできませんでしたが、Wi-Fi 速度は 1gbps を超えています。後で iperf3 テストを実行します。これまでのところ非常に満足しています。

  3. m***r

    現在、同じ固定 IP アドレス 192.168.1.168 を持つこれら 2 つを持っています。 IPを他のものに変更しても、停電するとデフォルト設定に戻ってしまいます。これ以外に、Cisco スイッチ上の 2 つの 1 ギガビット ポートに対して lacp を実行し、その後スイッチ間で 1 つの 2,5 ギガビット ポートを実行できるため、オフィスに高帯域ネットワークを拡張できます。この IP アドレスの問題は、同じ静的 IP を使用すると競合するため、電源が失われるたびに問題になります。どうやらこれはこのファームウェア 1.1 バージョンの既知の問題のようですが、アップデートはなく、アップデートをダウンロードできる場所もありません。

  4. m***r

    現在、同じ固定 IP アドレス 192.168.1.168 を持つこれら 2 つを持っています。 IPを他のものに変更しても、停電するとデフォルト設定に戻ってしまいます。これ以外に、Cisco スイッチ上の 2 つの 1 ギガビット ポートに対して lacp を実行し、その後スイッチ間で 1 つの 2,5 ギガビット ポートを実行できるため、オフィスに高帯域ネットワークを拡張できます。この IP アドレスの問題は、同じ静的 IP を使用すると競合するため、電源が失われるたびに問題になります。どうやらこれはこのファームウェア 1.1 バージョンの既知の問題のようですが、アップデートはなく、アップデートをダウンロードできる場所もありません。

  5. d***r

    製品は迅速に発送され、予定通りに到着しました。 Web 管理インターフェイスは高速で、現在のニーズに十分な設定オプションを提供します。 2.5GBの接続をテストできましたが、問題なく動作しました。唯一言及したい欠点は、Web 管理インターフェイス内でスイッチの名前を変更する方法がないことです。これは、インターフェイスにログインしているときに複数のスイッチを追跡するのに便利なオプションです。

この商品を購入したログイン済みのお客様のみがレビューを残すことができます。

This is the second time that the delivery driver threw the package onto my concrete porch. The first time, i had to return the device because it didnt function properly. I suspect it was due to delivery driver damaging device by throwing package. Id love to give a good review but the whole process is what is up for review and the professional (lack of) standards of the chosen courier are leaving me without a functioning device, wasting both my time and the sellers money.
Exactly what i was looking for. It supports 2.5g (confirmed), vlans (confirmed) - both mixed (tagged+untagged) as well as tagged-only (aka trunk) or a single untagged vlan (access port). Also the usual settings like storm control (configured but have not tested), stp/rstp (tested), igmp snooping (untested), jumbo frames up to 12k (will test) and lacp. And of course poe. I am feeding power, the management network (untagged), and multiple vlans to a ubiquiti unifi u7pro and it works like a charm. Ethernet handshake is at 2.5g. Due to missing equipment i could not yet test at full speed, but wifi rates exceed 1gbps. Will do iperf3 tests later. So far very satisfied.
I now have two of these that have the identical fixed ip address of 192.168.1.168. Even if i change the ip to something else, it reverts to the default settings on a power interruption. Other than this, i’m able to do lacp to two 1gbit ports on my cisco switch and then a single 2,5gbit between switches, so it lets me expand a higher band network into my office. This ip address issue is go 8ng to be a problem every time i lose power though, as they conflict using the same static ip. Apparently this is a known issue with this 1.1 version of the firmware, but there are no updates, nor anywhere where i can download one.
I now have two of these that have the identical fixed ip address of 192.168.1.168. Even if i change the ip to something else, it reverts to the default settings on a power interruption. Other than this, i’m able to do lacp to two 1gbit ports on my cisco switch and then a single 2,5gbit between switches, so it lets me expand a higher band network into my office. This ip address issue is go 8ng to be a problem every time i lose power though, as they conflict using the same static ip. Apparently this is a known issue with this 1.1 version of the firmware, but there are no updates, nor anywhere where i can download one.
The product shipped quickly and arrived on time. The web management interface is fast and provides enough configuration options for my current needs. Was able to test the 2.5gb connectivity, and it worked flawlessly. The only con i would mention is that there's no way to change the name of the switch within the web management interface. That would be a nice option to keep track of multiple switches when you're logged into the interface.